Nordictrack NTL24950 Manuel d'utilisateur télécharger pdf (Page 8)

2. Have a second person hold the console assembly near

the Upright (111). Insert the cable and the wire harness

extending from the console assembly through the hole in

the top of the Upright. Attach the console assembly to the

Upright with four Console Bolts (110) and two Star

Washers (114).

Firmly tighten the four Console Bolts.

Next, connect the cable and the wire harness extending

from the console assembly to the TV Cable (109) and the

Wire Harness (108). The connectors should slide to-

gether easily and snap into place. If they do not, turn

one connector and try again.

114

111

Console

Assembly

110

3. Note: For clarity, the console assembly is not shown

in this step.

Orient the Short Panel (106) so that the indicated cutouts

are at the top. Have a second person hold the Short Panel

against the Upright (111), with the top of the Short

Panel flush with the top of the Upright. Route the TV

Cable (109) down one side of the Short Panel, and route

the Wire Harness (108) down the other side of the Short

Panel, as shown.

Next, hold the Long Panel (112) against the opposite side

of the Upright (111); make sure that the top of the Long

Panel is flush with the top of the Upright and that no

wires are pinched. Press the Long Panel and the Short

Panel (106) together, and align the three holes in the

Long Panel with the holes in the three Panel Brackets

(140). Attach the Long Panel and the Short Panel with

three Panel Screws (139).

Firmly tighten the four Upright Bolts (113).

139

113

112

111

Cutouts

108

109

106

139

140

108

139

109

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 37 38

Commentaires sur ces manuels

Pas de commentaire

Nordictrack NTL24950 Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Sports et loisirs Nordictrack NTL24950